This Safety Sign Signals Poster covers essential information and advice relating to safety sign symbols and their meanings.
The poster states:These regulations provide the legal means to require employers to provide safety signs in a variety of situations where there is a significant risk to heal..
This electricity safety poster covers essential information and advice relating to The Electricity at Work Regulations 1989 and best working practices in the workplace
The poster goes into details regarding:The Preface of The Electricity at Work Regulations 1989. INTRODUCTION: Citation and Commence..
This safety poster covers essential information and advice relating to Hand Signaling.
The poster shows illustrations of popular hand signals used on construction sites and gives details of their meanings:DANGER - Emergency stop. Both arms point upwards with the palms facing forwards.START - Attent..
This safety poster covers essential information and advice relating to Abrasive Wheel Groups and best working practices
This poster states:Never exceed the maximum operating speed marked on the wheel or label. Operating a wheel above its maximum speed can be dangerous.It then has a table which show..
This safety poster covers essential information and advice relating to Abrasive Wheel Groups and best working practices
This poster states:THE ABRASIVE WHEEL REGULATIONS 1970 HAVE BEEN REPLACED BY THE PROVISION AND USE OF WORK EQUIPMENT REGULATIONS 1998 (PUWER), PLACING A GREATER EMPHASIS ON THE NE..
This safety poster covers essential information and advice relating to Abrasive Wheel Groups and best working practices
This poster states:THE ABRASIVE WHEEL REGULATIONS 1970 HAVE BEEN REPLACED BY THE PROVISION AND USE OF WORK EQUIPMENT REGULATIONS 1998 (PUWER), PLACING A GREATER EMPHASIS ON THE NE..
Covers essential information and advice relating to regulations and best working practices in the workplace
This poster states:This checklist identifies some of the hazards most commonly found on construction sites. The questions it asks are intended to help you decide whether your site is a safe a..
This safety poster covers essential information and advice relating to Mineral Oil
This poster states:Warning! Mineral Oil is harmful if swallowed or inhaled and can cause irritation to skin, eyes and respiratory tract. Oil Ingestion: Mineral Oil is a cathartic. Its affects may result in serious di..
This safety poster covers essential information and advice relating to Dangerous Substances and Explosive Atmosphere Regulations
This poster says:D.S.E.A.R. Dangerous Substances and Explosive Atmosphere RegulationsIntroduced on 9 December 2002, the Dangerous Substances and Explosive Atmosphere Regu..
This safety poster covers essential information and advice for those who work at height.
This poster says:The Work at Height Regulations 2005 are applicable to work of any kind at height, where there is a risk of a fall that may cause personal injuryWhat an employee must do: 1. Report any potenti..
This safety poster covers essential information and advice for those who work in the construction industry.
This poster says:The regulations came into force on 6 April 2015 consisting of 5 parts: Part 1. The interpretation and application of the Regulations. Part 2. Client duties in relation to man..
This safety poster covers essential information and advice for those who work on scaffolding.
This poster says:The Work at Height Regulations 2005 require an assessment to be undertaken before starting any work at height. If the assessment confirms that there is no alternative to working at height,..
Covers essential information and advice relating to regulations and best working practices in the workplace
Miscellaneous Products / MaterialsAny product outside of our standard choice of material/size range starts with a 5. This may include items such as rolls of tape, sign frames, floor graphic..
This safety poster give guidance for employees working on sites containing live cables and overhead wires.
This poster says:Be aware - Not all cables will be clearly marked on plans. 1. For safety, always assume all houses, offices, factories and shops have live cables running into them, no matter
..
Covers essential information and advice relating to regulations and best working practices in the workplace
Miscellaneous Products / MaterialsAny product outside of our standard choice of material/size range starts with a 5. This may include items such as rolls of tape, sign frames, floor graphic..
This safety poster give guidance for people working with substances hazardous to health.
This poster says:Handling Chemicals Safely. ? All chemicals should be clearly marked ? Be aware of the storage requirements of each type ? Take extreme care when mixing chemicals ? Keep away from heat and flam..
This double sided pocket guide advises employees of the meaning of the most common GHS symbols and their CHIP and CoSHH equivalents
The pocket guide says: The Globally Harmonized System (GHS) of classification and labeling of chemicals was introduced in 2009 and sees the gradual phasing out of th..
This safety poster give guidance for people working with substances hazardous to health.
This poster says: The Globally Harmonized System (GHS) of classification and labeling of chemicals was introduced in 2009 and sees the gradual phasing out of the orange and black CHIP labels. This poster has be..
This handy A5 size sign advises viewers of a step.
Material Options Explained
Below is a more detailed description of the materials this particular safety sign is available in. Helping you decide which sign option is most suitable for your application.
Rigid Plastic: Lightweight, gloss white ..
This handy A4 size sign advises viewers that there is a construction site. Further safety signs should be used to ensure safety on site is adhered to.
Material Options Explained
Below is a more detailed description of the materials this particular safety sign is available in. Helping you decide ..
This handy A4 size sign advises viewers that forklift trucks are operating in the area.
Material Options Explained
Below is a more detailed description of the materials this particular safety sign is available in. Helping you decide which sign option is most suitable for your application.
Rigid Pl..
This handy A4 Emergency escape sign is provided to guide viewers from wherever they are in a building, via a place of relative safety (the escape route) to the place of ultimate safety (the assembly area).
Material Options Explained
Below is a more detailed description of the materials this part..
This handy A4 Emergency escape sign is provided to guide viewers from wherever they are in a building, via a place of relative safety (the escape route) to the place of ultimate safety (the assembly area).
Material Options Explained
Below is a more detailed description of the materials this part..
This handy A4 Emergency escape sign is provided to guide viewers from wherever they are in a building, via a place of relative safety (the escape route) to the place of ultimate safety (the assembly area).
Material Options Explained
Below is a more detailed description of the materials this part..
This handy A4 Emergency escape sign is provided to guide viewers from wherever they are in a building, via a place of relative safety (the escape route) to the place of ultimate safety (the assembly area).
Material Options Explained
Below is a more detailed description of the materials this part..
This handy A4 Emergency escape sign is provided to guide viewers from wherever they are in a building, via a place of relative safety (the escape route) to the place of ultimate safety (the assembly area).
Material Options Explained
Below is a more detailed description of the materials this part..
This handy A5 size sign advises viewers that ear protection must be worn.
Material Options Explained
Below is a more detailed description of the materials this particular safety sign is available in. Helping you decide which sign option is most suitable for your application.
Rigid Plastic: Li..
0.9mm thick rigid white gloss PVC sign is lightweight with high impact strength Supplied with steel sign frame, zinc paint coatedFold flat sign frame allows the car park sign to be displayed quickly and easily..
0.9mm thick rigid white gloss PVC sign is lightweight with high impact strength Supplied with steel sign frame, zinc paint coatedFold flat sign frame allows the car park sign to be displayed quickly and easily..
Under the Regulatory Reform (Fire Safety Order 2005 any non-automatic fire fighting equipment should be identified with an appropriate sign. The signs should be positioned and designed in accordance with BS EN ISO 722 to ensure maximum levels of comprehension.
Material Options Explained
Below is a ..
Under the Regulatory Reform (Fire Safety Order 2005 any non-automatic fire fighting equipment should be identified with an appropriate sign. The signs should be positioned and designed in accordance with BS EN ISO 722 to ensure maximum levels of comprehension.
Material Options Explained
Below is..
Under the Regulatory Reform (Fire Safety Order 2005 any non-automatic fire fighting equipment should be identified with an appropriate sign. The signs should be positioned and designed in accordance with BS EN ISO 722 to ensure maximum levels of comprehension.
Material Options Explained
Below is a ..
Under the Regulatory Reform (Fire Safety Order 2005 any non-automatic fire fighting equipment should be identified with an appropriate sign. The signs should be positioned and designed in accordance with BS EN ISO 722 to ensure maximum levels of comprehension.
Material Options Explained
Below is a ..
Under the Regulatory Reform (Fire Safety Order 2005 any non-automatic fire fighting equipment should be identified with an appropriate sign. The signs should be positioned and designed in accordance with BS EN ISO 722 to ensure maximum levels of comprehension.
Material Options Explained
Below is a ..
Under the Regulatory Reform (Fire Safety Order 2005 any non-automatic fire fighting equipment should be identified with an appropriate sign. The signs should be positioned and designed in accordance with BS EN ISO 722 to ensure maximum levels of comprehension.
Material Options Explained
Below is a ..
Under the Regulatory Reform (Fire Safety Order 2005 any non-automatic fire fighting equipment should be identified with an appropriate sign. The signs should be positioned and designed in accordance with BS EN ISO 722 to ensure maximum levels of comprehension.
Material Options Explained
Below is a ..
Under the Regulatory Reform (Fire Safety Order 2005 any non-automatic fire fighting equipment should be identified with an appropriate sign. The signs should be positioned and designed in accordance with BS EN ISO 722 to ensure maximum levels of comprehension.
Material Options Explained
Below is a ..
Under the Regulatory Reform (Fire Safety Order 2005 any non-automatic fire fighting equipment should be identified with an appropriate sign. The signs should be positioned and designed in accordance with BS EN ISO 722 to ensure maximum levels of comprehension.
Material Options Explained
Below is a ..
Use this sign to inform staff and visitors who their dedicated fire warden or marshal is.
Material Options Explained
Below is a more detailed description of the materials this particular safety sign is available in. Helping you decide which sign option is most suitable for your application.
1. Rig..
Use this sign to inform staff and visitors who their dedicated fire warden is and where they can be found.
Material Options Explained
Below is a more detailed description of the materials this particular safety sign is available in. Helping you decide which sign option is most suitable for your ..
Use this sign to inform staff and visitors who their dedicated fire wardens are.
Material Options Explained
Below is a more detailed description of the materials this particular safety sign is available in. Helping you decide which sign option is most suitable for your application.
1. Rigid P..
Under the Regulatory Reform (Fire Safety Order 2005 any non-automatic fire fighting equipment should be identified with an appropriate sign. The signs should be positioned and designed in accordance with BS EN ISO 722 to ensure maximum levels of comprehension.
Material Options Explained
Below is a ..
Use this sign to inform staff and visitors when the Fire Alarm Test will be conducted.
Material Options Explained
Below is a more detailed description of the materials this particular safety sign is available in. Helping you decide which sign option is most suitable for your application.
1. Rigid ..
Under the Regulatory Reform (Fire Safety Order 2005 any non-automatic fire fighting equipment should be identified with an appropriate sign. The signs should be positioned and designed in accordance with BS EN ISO 722 to ensure maximum levels of comprehension.
Material Options Explained
Below is a ..
Every fire door should have an appropriate "Fire door" sign fitted. Where doors can be used from either side a sign is required on both sides. Doors which open on to a fire escape corridor should be locked shut and signed accordingly.
Material Options Explained
Below is a more detailed description ..
Inform staff and visitors of important safety messages where multiple languages may be spoken Responsibility lies with the employer to ensure all staff whose first language may not be English understand the potential risk in and around the workplace
Material Options Explained
Below is a more det..
Inform staff and visitors of important safety messages where multiple languages may be spoken Responsibility lies with the employer to ensure all staff whose first language may not be English understand the potential risk in and around the workplace
Material Options Explained
Below is a more det..
Use this sign to inform staff and visitors who their dedicated fire marshals are.
Material Options Explained
Below is a more detailed description of the materials this particular safety sign is available in. Helping you decide which sign option is most suitable for your application.
1. Rigid Plast..
Use this sign to inform staff and visitors who their dedicated fire marshal is.
Material Options Explained
Below is a more detailed description of the materials this particular safety sign is available in. Helping you decide which sign option is most suitable for your application.
1. Rigid Plastic..
Use this sign to inform staff and visitors who their dedicated fire marshal is and where they can be found.
Material Options Explained
Below is a more detailed description of the materials this particular safety sign is available in. Helping you decide which sign option is most suitable for your..
Under the Regulatory Reform (Fire Safety Order 2005 any non-automatic fire fighting equipment should be identified with an appropriate sign. The signs should be positioned and designed in accordance with BS EN ISO 722 to ensure maximum levels of comprehension.
Material Options Explained
Below is a ..
Under the Regulatory Reform (Fire Safety Order 2005 any non-automatic fire fighting equipment should be identified with an appropriate sign. The signs should be positioned and designed in accordance with BS EN ISO 722 to ensure maximum levels of comprehension.
Material Options Explained
Below is a ..
Under the Regulatory Reform (Fire Safety Order 2005 any non-automatic fire fighting equipment should be identified with an appropriate sign. The signs should be positioned and designed in accordance with BS EN ISO 722 to ensure maximum levels of comprehension.
Material Options Explained
Below is a ..
Under the Regulatory Reform (Fire Safety Order 2005 any non-automatic fire fighting equipment should be identified with an appropriate sign. The signs should be positioned and designed in accordance with BS EN ISO 722 to ensure maximum levels of comprehension.
Material Options Explained
Below is..
Display this sign on a notice board or communal area to give staff general information on extinguishers Do not site directly above extinguishers
Material Options Explained
Below is a more detailed description of the materials this particular safety sign is available in. Helping you decide which ..
Designed to assist the safe evacuation of the physically disabled in the event of an emergency. These signs meet the requirements of BS5588 Part 8 - The code of practice for means of escape for disabled people.
Material Options Explained
Below is a more detailed description of the materials this..
Designed to assist the safe evacuation of the physically disabled in the event of an emergency. These signs meet the requirements of BS5588 Part 8 - The code of practice for means of escape for disabled people.
Material Options Explained
Below is a more detailed description of the materials this..
Under the Regulatory Reform (Fire Safety Order 2005 any non-automatic fire fighting equipment should be identified with an appropriate sign. The signs should be positioned and designed in accordance with BS EN ISO 722 to ensure maximum levels of comprehension.
Material Options Explained
Below is..
Under the Regulatory Reform (Fire Safety Order 2005 any non-automatic fire fighting equipment should be identified with an appropriate sign. The signs should be positioned and designed in accordance with BS EN ISO 722 to ensure maximum levels of comprehension.
Material Options Explained
Below is..
Under the Regulatory Reform (Fire Safety Order 2005 any non-automatic fire fighting equipment should be identified with an appropriate sign. The signs should be positioned and designed in accordance with BS EN ISO 722 to ensure maximum levels of comprehension.
Material Options Explained
Below is..
Under the Regulatory Reform (Fire Safety Order 2005 any non-automatic fire fighting equipment should be identified with an appropriate sign. The signs should be positioned and designed in accordance with BS EN ISO 722 to ensure maximum levels of comprehension.
Material Options Explained
Below is..
Under the Regulatory Reform (Fire Safety Order 2005 any non-automatic fire fighting equipment should be identified with an appropriate sign. The signs should be positioned and designed in accordance with BS EN ISO 722 to ensure maximum levels of comprehension.
Material Options Explained
Below is..
Under the Regulatory Reform (Fire Safety Order 2005 any non-automatic fire fighting equipment should be identified with an appropriate sign. The signs should be positioned and designed in accordance with BS EN ISO 722 to ensure maximum levels of comprehension.
Material Options Explained
Below is..
Under the Regulatory Reform (Fire Safety Order 2005 any non-automatic fire fighting equipment should be identified with an appropriate sign. The signs should be positioned and designed in accordance with BS EN ISO 722 to ensure maximum levels of comprehension.
Material Options Explained
Below is..
Under the Regulatory Reform (Fire Safety Order 2005 any non-automatic fire fighting equipment should be identified with an appropriate sign. The signs should be positioned and designed in accordance with BS EN ISO 722 to ensure maximum levels of comprehension.
Material Options Explained
Below is..
Under the Regulatory Reform (Fire Safety Order 2005 any non-automatic fire fighting equipment should be identified with an appropriate sign. The signs should be positioned and designed in accordance with BS EN ISO 722 to ensure maximum levels of comprehension.
Material Options Explained
Below is..
Advise staff and visitors what to do in the event of a fire within the building - provides specific details relevant to the building in question.
Material Options Explained
Below is a more detailed description of the materials this particular safety sign is available in. Helping you decide which si..
Advise staff and visitors what to do in the event of a fire within the building - provides specific details relevant to the building in question.
Material Options Explained
Below is a more detailed description of the materials this particular safety sign is available in. Helping you decide which si..
Advise staff and visitors what to do in the event of a fire within the building - provides specific details relevant to the building in question.
Material Options Explained
Below is a more detailed description of the materials this particular safety sign is available in. Helping you decide which si..
Every fire door should have an appropriate "Fire door" sign fitted. Where doors can be used from either side a sign is required on both sides. Doors which open on to a fire escape corridor should be locked shut and signed accordingly.
Material Options Explained
Below is a more detailed description ..
Every fire door should have an appropriate "Fire door" sign fitted. Where doors can be used from either side a sign is required on both sides. Doors which open on to a fire escape corridor should be locked shut and signed accordingly.
Material Options Explained
Below is a more detailed description ..
Every fire door should have an appropriate "Fire door" sign fitted. Where doors can be used from either side a sign is required on both sides. Doors which open on to a fire escape corridor should be locked shut and signed accordingly.
Material Options Explained
Below is a more detailed description ..
When installed outside, place this sign on the wall either to the opposite side to the door's hinges or above the door.
Material Options Explained
Below is a more detailed description of the materials this particular safety sign is available in. Helping you decide which sign option is most suita..
Every fire door should have an appropriate "Fire door" sign fitted. Where doors can be used from either side a sign is required on both sides. Doors which open on to a fire escape corridor should be locked shut and signed accordingly.
Material Options Explained
Below is a more detailed description ..
Every fire door should have an appropriate "Fire door" sign fitted. Where doors can be used from either side a sign is required on both sides. Doors which open on to a fire escape corridor should be locked shut and signed accordingly.
Material Options Explained
Below is a more detailed descripti..
Every fire door should have an appropriate "Fire door" sign fitted. Where doors can be used from either side a sign is required on both sides. Doors which open on to a fire escape corridor should be locked shut and signed accordingly.
Material Options Explained
Below is a more detailed descripti..
Every fire door should have an appropriate "Fire door" sign fitted. Where doors can be used from either side a sign is required on both sides. Doors which open on to a fire escape corridor should be locked shut and signed accordingly.
Material Options Explained
Below is a more detailed descripti..
Every fire door should have an appropriate "Fire door" sign fitted. Where doors can be used from either side a sign is required on both sides. Doors which open on to a fire escape corridor should be locked shut and signed accordingly.
Material Options Explained
Below is a more detailed description ..
Every fire door should have an appropriate "Fire door" sign fitted. Where doors can be used from either side a sign is required on both sides. Doors which open on to a fire escape corridor should be locked shut and signed accordingly.
Material Options Explained
Below is a more detailed description ..
Every fire door should have an appropriate "Fire door" sign fitted. Where doors can be used from either side a sign is required on both sides. Doors which open on to a fire escape corridor should be locked shut and signed accordingly.
Material Options Explained
Below is a more detailed description ..
Under the Regulatory Reform (Fire Safety Order 2005 any non-automatic fire fighting equipment should be identified with an appropriate sign. The signs should be positioned and designed in accordance with BS EN ISO 722 to ensure maximum levels of comprehension.
Material Options Explained
Below is..
Every fire door should have an appropriate "Fire door" sign fitted. Where doors can be used from either side a sign is required on both sides. Doors which open on to a fire escape corridor should be locked shut and signed accordingly.
Material Options Explained
Below is a more detailed descripti..
Every fire door should have an appropriate "Fire door" sign fitted. Where doors can be used from either side a sign is required on both sides. Doors which open on to a fire escape corridor should be locked shut and signed accordingly.
Material Options Explained
Below is a more detailed description ..
Every fire door should have an appropriate "Fire door" sign fitted. Where doors can be used from either side a sign is required on both sides. Doors which open on to a fire escape corridor should be locked shut and signed accordingly.
Material Options Explained
Below is a more detailed descripti..
Every fire door should have an appropriate "Fire door" sign fitted. Where doors can be used from either side a sign is required on both sides. Doors which open on to a fire escape corridor should be locked shut and signed accordingly.
Material Options Explained
Below is a more detailed descripti..
Emergency escape signs are provided to guide you from wherever you are in a building, via a place of relative safety (the escape route) to the place of ultimate safety (the assembly area).
Material Options Explained
Below is a more detailed description of the materials this particular safety sig..
Every fire door should have an appropriate "Fire door" sign fitted. Where doors can be used from either side a sign is required on both sides. Doors which open on to a fire escape corridor should be locked shut and signed accordingly.
Material Options Explained
Below is a more detailed description ..
Every fire door should have an appropriate "Fire door" sign fitted. Where doors can be used from either side a sign is required on both sides. Doors which open on to a fire escape corridor should be locked shut and signed accordingly.
Material Options Explained
Below is a more detailed description ..
Every fire door should have an appropriate "Fire door" sign fitted. Where doors can be used from either side a sign is required on both sides. Doors which open on to a fire escape corridor should be locked shut and signed accordingly.
Material Options Explained
Below is a more detailed description ..
Every fire door should have an appropriate "Fire door" sign fitted. Where doors can be used from either side a sign is required on both sides. Doors which open on to a fire escape corridor should be locked shut and signed accordingly.
Material Options Explained
Below is a more detailed description ..
Every fire door should have an appropriate "Fire door" sign fitted. Where doors can be used from either side a sign is required on both sides. Doors which open on to a fire escape corridor should be locked shut and signed accordingly.
Material Options Explained
Below is a more detailed description ..
Every fire door should have an appropriate "Fire door" sign fitted. Where doors can be used from either side a sign is required on both sides. Doors which open on to a fire escape corridor should be locked shut and signed accordingly.
Material Options Explained
Below is a more detailed description ..
Every fire door should have an appropriate "Fire door" sign fitted. Where doors can be used from either side a sign is required on both sides. Doors which open on to a fire escape corridor should be locked shut and signed accordingly.
Material Options Explained
Below is a more detailed description ..
Every fire door should have an appropriate "Fire door" sign fitted. Where doors can be used from either side a sign is required on both sides. Doors which open on to a fire escape corridor should be locked shut and signed accordingly.
Material Options Explained
Below is a more detailed description ..
Every fire door should have an appropriate "Fire door" sign fitted. Where doors can be used from either side a sign is required on both sides. Doors which open on to a fire escape corridor should be locked shut and signed accordingly.
Material Options Explained
Below is a more detailed description ..
Every fire door should have an appropriate "Fire door" sign fitted. Where doors can be used from either side a sign is required on both sides. Doors which open on to a fire escape corridor should be locked shut and signed accordingly.
Material Options Explained
Below is a more detailed descripti..
Every fire door should have an appropriate "Fire door" sign fitted. Where doors can be used from either side a sign is required on both sides. Doors which open on to a fire escape corridor should be locked shut and signed accordingly.
Material Options Explained
Below is a more detailed descripti..
Inform staff and visitors of important safety messages where multiple languages may be spoken Responsibility lies with the employer to ensure all staff whose first language may not be English understand the potential risk in and around the workplace
Material Options Explained
Below is a more det..
Inform staff and visitors of important safety messages where multiple languages may be spoken Responsibility lies with the employer to ensure all staff whose first language may not be English understand the potential risk in and around the workplace
Material Options Explained
Below is a more det..
GDPR requires the installation of CCTV signs, showing specific wording to assist the public to identify the owner/operator of the system
Material Options Explained
Below is a more detailed description of the materials this particular safety sign is available in. Helping you decide which sign option..